ACC. KIT FOR 12XSEMIPACK 1DIOD

SEMIPACK - Technical Information Version 1.1 - /2009 ® 6 Mounting Hardware for SEMIPACK Modules For SEMIPACK 1,2,3,4 there are complete kits available: Fig.6-1 Mounting hard ward for SEMIPACK modules 1) Spindle No. 30143660 with 2 nuts M 10 2) For SEMIPACK 3 with 10 mm thick base plates and SEMIPACK 4 on heat sink P3, use M5×20(No. 30145490), available on request All accessories can also be ordered separately, Fig.6-2 Mounting screws for SEMIPACK Modules Two different double plug caps are available, 32769800(r) has a right nose and 32769900(l) has a left nose. 32769800(r) is used for terminals 4 and 5 of SEMIPACK 2,3,4,5; 32769900(l) is used for terminals 6 and 7 of SEMPACK 2,3,5 and SEMIPACK 6. Page 34 of 40 13.08.2009 © by SEMIKRON